Read-Only Archives

View unanswered posts | View active topics It is currently Wed Jan 18, 2017 8:26 pm



Reply to topic  [ 31 posts ]  Go to page 1, 2  Next
 One Drop Yo-Yo Spec Comparison 
Author Message
User avatar

Joined: Thu Jan 08, 2009 1:05 pm
Posts: 4163
Project
Weight: 64 grams
Width: 40.2mm
Diameter: 50mm
Axle System: Hex Nut
Stock Response: .555 Kentaro Pad
Friction Response Groove Inside Diameter: .555" (14.1mm)
Friction Response Groove Depth: .02
Gap Width: 4.24mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Image


MarkMont

Weight: 66 grams
Width: 41mm
Diameter: 50mm
Axle System: Hex Nut
Stock Response: One Drop Silicone
Friction Response Groove Inside Diameter: .555" (14.1mm)
Friction Response Groove Depth: .03
Gap Width: 4.46mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Image

M1
Weight: 65 grams
Width: 35mm
Diameter: 50mm
Axle System: Pressed Round Nut
Stock Response: .555 One Drop Silicone Pad or Flow Groove
Pad Response Groove Inside Diameter: .555" (14.1mm)
Pad Response Groove Depth: .03
Flow Groove Response Depth: .075
Gap Width: 4.3mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Image

Project 2
Weight: 67.6 grams
Width: 40.63mm
Diameter: 50mm
Axle System: Hex Nut
Stock Response: Flow Groove
Flow Groove Response Depth: .075
Gap Width: 4.37mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Image

Dingo
Weight: 63 grams
Width: 32mm
Diameter: 46mm
Axle System: Pressed Round Nut
Stock Response: Flow Groove
Flow Groove Response Depth: .075
Gap Width: 4.3mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Image

Sovereign
Weight: 67.5 grams
Width: 38.4mm
Diameter: 50.8mm
Axle System: Tapped
Stock Response: Flow Groove
Gap Width: 4mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Image

Y Factor
Weight: 66.4 grams
Width: 41.30mm
Diameter: 50.4mm
Axle System: Pressed Round Nut
Stock Response: Flow Groove
Gap Width: 4.70mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Image

MarkMont Next
Weight: 67 grams
Width: 40.2mm
Diameter: 50.04mm
Axle System: Pressed MarkMont Nut
Stock Response: Flow Groove
Gap Width: 4.4mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Soda Blasted and Nickel Plated
Image

54
Base Weight (two halves, response pads, bearing): 58.8 grams
Weight with aluminum spikes: 63 grams
Weight with brass domes: 66.4 grams
Width: 40.9mm
Diameter: 54mm
Axle System: Side Effects
Stock Response: Flow Groove
Gap Width: 4.34mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm)
Image

Wooly MarkMont
Weight: 67 grams
Width: 40.6mm
Diameter: 50.3mm
Axle System: Tapped
Stock Response: Flow Groove
Gap Width: 4.06mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Soda Blasted and Nickel Plated
Image

CODE1
Base Weight (two halves, response pads, bearing): 60 grams
Weight with aluminum CODE1 Side Effects: 64 grams
Width: 42mm
Diameter: 56mm
Axle System: Side Effects
Stock Response: Flow Groove
Gap Width: 4.35mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm) (First 100 purple/clear and green/clear fades were Soda Blasted)
Image

The Dietz
Base Weight (two halves, response pad, bearing): 59.9 grams
Weight with aluminum Dietz Side Effects: 62.96 grams
Width: 41.5mm
Diameter: 50.4mm
Axle System: Side Effects
Stock Response: Flow Groove
Gap Width: 4.34mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm)
Image

CafeRacer
Weight: 64 grams
Width: 38.9mm
Diameter: 50.4mm
Axle System: Tapped
Stock Response: Flow Groove
Gap Width: 4.06mm
Bearing Size: Large (C) stainless steel (One Drop Value Bearing)
Finish: Pyramatte (tm)
Image

DANG
Base Weight (two halves, response pads, bearing): 60.7 grams
Weight with aluminum Ultra Light Side Effects: 63.2 grams
Width: 41.3mm
Diameter: 55.25mm
Axle System: Side Effects
Stock Response: Flow Groove
Gap Width: 4.35mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm)
Image

Burnside
Weight: 67.25 grams
Width: 42.55 mm
Diameter: 56.77mm
Axle System: Tapped
Stock Response: Flow Groove
Gap Width: 4.42mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm)
Image

CODE2
Base Weight (two halves, response pads, bearing): 63.54 grams
Weight with aluminum Spike Side Effects: 66.7 grams
Width: 43.93mm
Diameter: 56mm
Axle System: Side Effects
Stock Response: Flow Groove
Gap Width: 4.62mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm)
Image

Cascade
Base Weight (two halves, response pads, bearing): 63.92 grams
Weight with aluminum Dome Side Effects: 66.90 grams
Width: 45mm
Diameter: 53mm
Axle System: Side Effects
Stock Response: Flow Groove
Gap Width: 4.35mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm)
Image

Yelets
Base Weight (two halves, response pad, bearing): 61.5 grams
Weight with aluminum Ultra Light Side Effects: 64 grams
Width/Longitude: 38.4997mm
Diameter/Latitude: 52.6147mm
Stock Response: Flow Groove
Gap Width: 4.34mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm)
Image

Sakura SE
Base Weight (two halves, response pads, bearing): 62.82 grams
Weight with Sakura Side Effects: 65.72 grams
Width: 41.25mm
Diameter: 52mm
Axle System: Side Effects
Stock Response: Flow Groove
Gap Width: 4.34mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte (tm)
Image


Mon Feb 23, 2009 7:37 pm
Profile

Joined: Sun Feb 15, 2009 7:30 pm
Posts: 113
that is one sweet pic and thanks for the specs what about the chaz is there any change in the specs there

_________________
www.edmontonyoyoclub.com


Mon Feb 23, 2009 9:45 pm
Profile
User avatar

Joined: Thu Jan 08, 2009 2:05 pm
Posts: 2971
Location: Cleveland
chaz is same as the project specs except it has Chaz Pads for the response system.


Mon Feb 23, 2009 9:47 pm
Profile WWW

Joined: Sun Feb 15, 2009 7:30 pm
Posts: 113
nice thanks once again I just started using one drops and feel in love. I actually traded all my bvm and peaks to get more one drops so I am still learning all about them

_________________
www.edmontonyoyoclub.com


Mon Feb 23, 2009 9:53 pm
Profile

Joined: Wed Jan 14, 2009 12:44 am
Posts: 275
Location: San Jose California
i was going to take that picture vguitars haha. all i throw now is one drop yoyos and my milk XP

_________________
Ill cry when i see a yoyo in a teal color


Mon Feb 23, 2009 10:09 pm
Profile

Joined: Tue Jan 13, 2009 11:54 am
Posts: 387
Location: Portland, Oregon
Project 2
????


;)

_________________
Paul Dang
One Drop Players Team


Mon Feb 23, 2009 11:27 pm
Profile

Joined: Fri Jan 23, 2009 5:50 pm
Posts: 57
UGH i feel so stupid
I traded my project away for a GM2 after GA States, and im really missing it right now


Tue Feb 24, 2009 6:00 pm
Profile
User avatar

Joined: Fri Jan 16, 2009 10:20 pm
Posts: 1327
Location: Cloverdale, California
All of them mad sexy- even after I have smacked them into something a few times :o

_________________
Image
http://dlaurice.podomatic.com/
http://djgreedyg.proboards77.com/Chatty Mouth: Reggae, Rants and Reasoning


Tue Feb 24, 2009 7:02 pm
Profile WWW

Joined: Sun Feb 15, 2009 7:30 pm
Posts: 113
man sorry about the large photo.

_________________
www.edmontonyoyoclub.com


Wed Feb 25, 2009 10:05 pm
Profile
User avatar

Joined: Fri Jan 16, 2009 10:20 pm
Posts: 1327
Location: Cloverdale, California
size is not so bad (even though my 24' monitor can't handle it)...just stand still when you take the next one :?

_________________
Image
http://dlaurice.podomatic.com/
http://djgreedyg.proboards77.com/Chatty Mouth: Reggae, Rants and Reasoning


Thu Mar 19, 2009 7:24 pm
Profile WWW
User avatar

Joined: Wed Jan 21, 2009 3:57 pm
Posts: 1308
i think its time to add the Sovereign to this post :)

_________________
dirty_birdy: private chat alert....locking on new target...target identified as ZEKE....
:lol:

saintrobyn: Hi Shawn. XXX turned out great.

markmontgomery: but i bet my chest is still bigger then yours

yoyogirl: lick it off


Thu Jan 14, 2010 8:57 pm
Profile
User avatar

Joined: Thu Jan 08, 2009 1:05 pm
Posts: 4163
You are correct sir :)


Fri Jan 15, 2010 9:24 am
Profile
User avatar

Joined: Sat May 09, 2009 9:18 am
Posts: 774
Location: Calgary, Canada (free healthcare!)
Wow, I'm late but this is really useful :]

_________________
http://chrismphotography.deviantart.com/
Weeeeeeeeee...


Sun Jan 31, 2010 8:33 pm
Profile
User avatar

Joined: Sat Mar 20, 2010 6:49 am
Posts: 323
Can you tell me the length of the Project 2 axle?

_________________
I am looking for Tom Kuhn wooden throws. Shoot me a PM if you are willing to part with any.


Wed Apr 07, 2010 11:33 am
Profile
User avatar

Joined: Thu Jan 08, 2009 1:05 pm
Posts: 4163
rikardob wrote:
Can you tell me the length of the Project 2 axle?


16mm


Wed Apr 07, 2010 11:47 am
Profile

Joined: Thu May 06, 2010 12:22 pm
Posts: 201
Location: Santa Cruz, CA
time to add the MMN
soon the 54 as well!

_________________
------------------------
Steve


Mon Sep 13, 2010 10:53 am
Profile WWW
User avatar

Joined: Mon Jun 01, 2009 9:26 am
Posts: 1593
Location: Calgary, AB
Markmont.Next

Specs:
Weight: 67 grams
Width: 40.2mm
Diameter: 50.04mm
Stock Response: Flow Groove
Gap Width: 4.4mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Soda Blasted and Nickel Plated
Overrall: ""Raduclon, Destroyer of Worlds" level awesomeness.

_________________
All right you primitive screwheads, listen up.
You see this?
This... is my Boomstick!
~Bruce Campbell~


-captainhunter-
http://yorad.ca


Mon Sep 13, 2010 10:58 am
Profile WWW
User avatar

Joined: Fri Aug 28, 2009 8:12 pm
Posts: 2472
I love this thread! :D

_________________
0100111100101110010001000010111001000100001000000010000001000110010101000101011100100001

Reality is the leading cause of stress amongst those in touch with it..... ;)

Growing old is inevitable, growing up is optional. ;)


Sat Sep 18, 2010 10:17 am
Profile

Joined: Fri Dec 18, 2009 8:08 pm
Posts: 114
Questions: 1) Why is the Sov's gap 4MM instead of ~4.3MM? 2) Where did you get the original Sov's wooden box?


Wed May 11, 2011 9:12 pm
Profile
User avatar

Joined: Tue Feb 03, 2009 3:00 am
Posts: 2880
Location: Area 51
Hey David!

Time to add the Code1 to the top of this thread! 8-)

db


Thu May 12, 2011 1:45 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 31 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.